Gen 1 and Gen 2 Calipers interchange?

miker · 08-16-2010, 09:50 AM

I am looking for a friend for some gen 1 calipers that he discovered would fit on his 1991 FJ1200. Brohay stated that he thought Gen 1 and Gen 2 calipers would interchange. Can anyone confirm or deny this? If they do not are there any other models that share the same calipers (front) as the first gen FZ1? I need the complete setup from the lever down.

JohnnyLfromCT · 08-16-2010, 10:00 AM

Quote:

Originally Posted by miker

are there any other models that share the same calipers (front) as the first gen FZ1?

I believe the Roadstar Warrior has the same calipers as the Gen 1...not positive though.

RavenRider · 08-16-2010, 10:38 AM

Try some cross referencing of part numbers at

www.partshark.com

miker · 08-16-2010, 12:43 PM

OK I checked partshark and the numbers for the calipers are different. I guess the difference could be internal or line location but not going to take a chance. I also cross referenced the Warrior and it had different numbers as well. So the search for calipers and information continues.....

FZeno1 · 08-16-2010, 12:50 PM

Quote:

Originally Posted by JohnnyLfromCT

I believe the Roadstar Warrior has the same calipers as the Gen 1...not positive though.

Def Confirmed..

I have a Roadstar Warrior and they are the same as Gen II calipers. And yes Gen II calipers do fit Gen I..I have a set of Gen II calipers on my O1 as we speak.

-Z

RavenRider · 08-16-2010, 02:42 PM

BTW, the R-6s use the same caliper, same part number. Up to 2002 anyway.

tqmx1 · 08-16-2010, 06:17 PM

As long as they are not radial mounted the bolt pattern is the same for all the mono block brakes. the only differance is the cap colors and on some the inlet line location. The pad P/Ns are the same for all of them.

08-16-2010, 09:50 AM	#1
miker Registered User Join Date: Jul 2005 Location: Redding, CA Posts: 590	Gen 1 and Gen 2 Calipers interchange? I am looking for a friend for some gen 1 calipers that he discovered would fit on his 1991 FJ1200. Brohay stated that he thought Gen 1 and Gen 2 calipers would interchange. Can anyone confirm or deny this? If they do not are there any other models that share the same calipers (front) as the first gen FZ1? I need the complete setup from the lever down.

08-16-2010, 10:38 AM	#3
RavenRider Old But Not Slow Join Date: Jul 2004 Location: Hastings,MN Posts: 7,925	Try some cross referencing of part numbers at www.partshark.com __________________ Glenn Ride,Ride Like the Wind Before I Get Old Integrity Suspension/Midnight Motorcyle (Full Service Center) Traxxion Dynamics Installation & Service - Minnesota 651-304-7286

08-16-2010, 02:42 PM	#6
RavenRider Old But Not Slow Join Date: Jul 2004 Location: Hastings,MN Posts: 7,925	BTW, the R-6s use the same caliper, same part number. Up to 2002 anyway. __________________ Glenn Ride,Ride Like the Wind Before I Get Old Integrity Suspension/Midnight Motorcyle (Full Service Center) Traxxion Dynamics Installation & Service - Minnesota 651-304-7286

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

wArDoG (Prez, Treasurer, Web Site & Admin)	Rabeet (Admin)
firstfz (Web Site & Admin)	Desmo (Admin)
RoadRashed (Admin)	dipps (Admin)
Black Mantis (Moderator)	pogden (Moderator)

08-16-2010, 12:43 PM	#4
miker Registered User Join Date: Jul 2005 Location: Redding, CA Posts: 590	OK I checked partshark and the numbers for the calipers are different. I guess the difference could be internal or line location but not going to take a chance. I also cross referenced the Warrior and it had different numbers as well. So the search for calipers and information continues.....

08-16-2010, 06:17 PM	#7
tqmx1 Registered User Join Date: Jun 2008 Location: Sacramento Ca. Posts: 279	As long as they are not radial mounted the bolt pattern is the same for all the mono block brakes. the only differance is the cap colors and on some the inlet line location. The pad P/Ns are the same for all of them.